Issue: TL45 radio keeps resetting the Tx power to x dBm
The causes of this issue can be the following:
1. Radio set on a DFS channel; set the channel in the range of channel 20 to channel 24
2. Radio set to "Auto Rate Shifting Enable"; go to config page and uncheck
3. The power injector is not working optimally; swap for a known-good one and test
If everything is fine with those three; reflash the FW and test on non-DFS channels.
If you still experience this issue, your radio is faulty.
Comments
0 comments
Please sign in to leave a comment.