Apex Console/Serial Cable Pinout & Port settings

Find attached picture here. You can also refer to page no: 128 on Apex User Manual Rev 2.1 for console pin-out.

Connect Serial/Console cable to Trango Apex at one end and reboot the radio with below Serial/Console port settings on your laptop/computer at other end.

Serial Port Settings:

Bits per second: 115200 
Data bits: 8 
Parity: None 
Stop Bits: 1 
Flow Control: none

You will be prompted with trango login: prompt.

Login with Default username: admin password: trango

You need to login to config mode to change configuration. Simply type config in view mode and password: trango