Bug fixes
- Default Configuration: Update some default configuration parameters:
- 8PSK ACM degrade threshold to -17
- QPSK up threshold set to -19
- Tx freq set to 24085
- Log timer set to 15 seconds
- Speed mod max set to 1024 and min to QPSK
- Egress internally set to 40
- QoS weight default set to: 1, 3, 6, 9
- DSCP mapping for 18, 20, 22 set to Pri 2
- Temp max set to 85 degrees
- Unit ID set to “StrataLink 24”
- CLI: Remove egress_margin and bootimage toggle from the CLI as they are not relevant commands.
- Counters: BER updated in status modem command to display the accumulative value instead of instantaneous.
- Modem: Correct poor PLL phase noise at high temperatures.
- OS: Protect against shared memory conflicts.
- SNMP: Created new OID for linktest instead of using the diagnostic OID.
- Transmit: Set the transmit power after opmode off and on with the temperature adjustment.
Condensed instructions: (detailed instructions are available in the release notes)
- Transfer the image upgrade file to the radio. (Do not un-tar the file.) Either download the file from here and transfer with TFTP, or pull it directly from our FTP server.
- Issue cli command <bootimage upgrade>
- Reboot the SL24.
The firmware and release notes with detailed upgrade instructions and history and linked below. The MIB is available at: SL24 MIB (PTP MIB v4) : Trango Support. A PRTG ready .oidlib can be found at: SNMP Monitoring with PRTG : Trango Support
Comments
0 comments
Please sign in to leave a comment.