New Features/Enhancements
- Status remote: Reduce the timer for sending out the current status to the remote unit from 20 seconds to 5 seconds to speed up the updates on the web interface.
- Tx Power: Adjust transmit power incrementally by 0.1 dB step size at times when user configures the power and also when the tx power loop adjusts the power according to the temperature.
Bug fixes
- ACM: Make CLI display for acm_info and sysinfo 5 consistent.
- Counters: Removed dropped air frames from the RF counters since the counter is not accurately reflecting the correct number of dropped frames.
- Diagnostic: FPGA checking reported failed in the past, removed the incorrect register.
- IP: Reconfigure gateway after changing IBM tagging or VLAN ID.
- Management unresponsiveness: Three events were using the same resource and are now independent.
- Web: DSCP QoS mapping adjusted for global setting from per-port.
- Web: Fixed display of unit_id (remark) to eliminiate trailing characters.
- Web: Fixed mapping of Tx/Rx PLL to show the correct status.
Condensed instructions: (detailed instructions are available in the release notes)
- Transfer the image upgrade file to the radio. (Do not un-tar the file.) Either download the file from here and transfer with TFTP, or pull it directly from our FTP server.
- Issue cli command <bootimage upgrade>
- Reboot the SL24.
The firmware and release notes with detailed upgrade instructions and history and linked below. The MIB is available at: SL24 MIB (PTP MIB v4) : Trango Support. A PRTG ready .oidlib can be found at: SNMP Monitoring with PRTG : Trango Support
Comments
0 comments
Please sign in to leave a comment.