1 TRANGO-APEX-GIGE-MIB|ibm|gigeibmenable 1.3.6.1.4.1.5454.1.60.4.1.1.0 vmAbsolute mkDirect sutCustom # gigeibmenable 1 no 0 no no no no Enable/Disable Inband Management feature TRANGO-APEX-GIGE-MIB|ibm|gige ibm vlan id 1.3.6.1.4.1.5454.1.60.4.1.3.0 vmAbsolute mkDirect sutCustom # gige ibm vlan id 1 no 0 no no no no Assign/Display IBM Vlan ID TRANGO-APEX-GIGE-MIB|ibm|gige ibm port 1.3.6.1.4.1.5454.1.60.4.1.4.0 vmAbsolute mkDirect sutCustom # gige ibm port 1 no 0 no no no no Assign/Display IBM port TRANGO-APEX-GIGE-MIB|eth enable|gige eth1enable 1.3.6.1.4.1.5454.1.60.4.2.1.0 vmAbsolute mkDirect sutCustom # gige eth1enable 1 no 0 no no no no Activate/Deactive link status on Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth enable|gige eth2enable 1.3.6.1.4.1.5454.1.60.4.2.2.0 vmAbsolute mkDirect sutCustom # gige eth2enable 1 no 0 no no no no Activate/Deactive link status on Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth status|gige eth1status 1.3.6.1.4.1.5454.1.60.4.3.1.0 vmAbsolute mkDirect sutCustom # gige eth1status 1 no 0 no no no no Show link status on Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth status|gige eth2status 1.3.6.1.4.1.5454.1.60.4.3.2.0 vmAbsolute mkDirect sutCustom # gige eth2status 1 no 0 no no no no Show link status on Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth speed|gige eth1speed 1.3.6.1.4.1.5454.1.60.4.4.1.0 vmAbsolute mkDirect sutCustom # gige eth1speed 1 no 0 no no no no Display / set link speed on Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth speed|gige eth2speed 1.3.6.1.4.1.5454.1.60.4.4.2.0 vmAbsolute mkDirect sutCustom # gige eth2speed 1 no 0 no no no no Display link speed on Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth duplex|gige eth1duplex 1.3.6.1.4.1.5454.1.60.4.5.1.0 vmAbsolute mkDirect sutCustom # gige eth1duplex 1 no 0 no no no no Display / set duplex Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth duplex|gige eth2duplex 1.3.6.1.4.1.5454.1.60.4.5.2.0 vmAbsolute mkDirect sutCustom # gige eth2duplex 1 no 0 no no no no Display duplex Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth priority|gige eth1priority 1.3.6.1.4.1.5454.1.60.4.6.1.0 vmAbsolute mkDirect sutCustom # gige eth1priority 1 no 0 no no no no Display / set Priority for Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth priority|gige eth2priority 1.3.6.1.4.1.5454.1.60.4.6.2.0 vmAbsolute mkDirect sutCustom # gige eth2priority 1 no 0 no no no no Display / set Priority for Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth max rate|gige eth1max rate 1.3.6.1.4.1.5454.1.60.4.7.1.0 vmAbsolute mkDirect sutCustom # gige eth1max rate 1 no 0 no no no no Display / set Max Rate for Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth max rate|gige eth2max rate 1.3.6.1.4.1.5454.1.60.4.7.2.0 vmAbsolute mkDirect sutCustom # gige eth2max rate 1 no 0 no no no no Display / set Max Rate for Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth pause frame|gige eth1pause frame 1.3.6.1.4.1.5454.1.60.4.8.1.0 vmAbsolute mkDirect sutCustom # gige eth1pause frame 1 no 0 no no no no Display / set Burst Rate for Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth pause frame|gige eth2pause frame 1.3.6.1.4.1.5454.1.60.4.8.2.0 vmAbsolute mkDirect sutCustom # gige eth2pause frame 1 no 0 no no no no Display / set Burst Rate for Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth in octets|gige eth1in octets 1.3.6.1.4.1.5454.1.60.4.9.1.0 vmDiff mkDirect sutCustom # gige eth1in octets 1 no 0 no no yes no Display number of octet coming in to Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth in octets|gige eth2in octets 1.3.6.1.4.1.5454.1.60.4.9.2.0 vmDiff mkDirect sutCustom # gige eth2in octets 1 no 0 no no yes no Display number of octet coming in to Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth in ucast packets|gige eth1in ucast packets 1.3.6.1.4.1.5454.1.60.4.10.1.0 vmDiff mkDirect sutCustom # gige eth1in ucast packets 1 no 0 no no yes no Display number of Unicast packet coming in to Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth in ucast packets|gige eth2in ucast packets 1.3.6.1.4.1.5454.1.60.4.10.2.0 vmDiff mkDirect sutCustom # gige eth2in ucast packets 1 no 0 no no yes no Display number of Unicast packet coming in to Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth innucast packets|gige eth1innucast packets 1.3.6.1.4.1.5454.1.60.4.11.1.0 vmDiff mkDirect sutCustom # gige eth1innucast packets 1 no 0 no no yes no Display number of non-Unicast packet coming in to Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth innucast packets|gige eth2innucast packets 1.3.6.1.4.1.5454.1.60.4.11.2.0 vmDiff mkDirect sutCustom # gige eth2innucast packets 1 no 0 no no yes no Display number of non-Unicast packet coming in to Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth in total packets|gige eth1in total packets 1.3.6.1.4.1.5454.1.60.4.12.1.0 vmDiff mkDirect sutCustom # gige eth1in total packets 1 no 0 no no yes no Display number of Total packet coming in to Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth in total packets|gige eth2in total packets 1.3.6.1.4.1.5454.1.60.4.12.2.0 vmDiff mkDirect sutCustom # gige eth2in total packets 1 no 0 no no yes no Display number of Total packet coming in to Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth out octets|gige eth1out octets 1.3.6.1.4.1.5454.1.60.4.13.1.0 vmDiff mkDirect sutCustom # gige eth1out octets 1 no 0 no no yes no Display number of Octets going out from Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth out octets|gige eth2out octets 1.3.6.1.4.1.5454.1.60.4.13.2.0 vmDiff mkDirect sutCustom # gige eth2out octets 1 no 0 no no yes no Display number of Octets going out from Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth out ucast packets|gige eth1out ucast packets 1.3.6.1.4.1.5454.1.60.4.14.1.0 vmDiff mkDirect sutCustom # gige eth1out ucast packets 1 no 0 no no yes no Display number of Unicast packets going out from Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth out ucast packets|gige eth2out ucast packets 1.3.6.1.4.1.5454.1.60.4.14.2.0 vmDiff mkDirect sutCustom # gige eth2out ucast packets 1 no 0 no no yes no Display number of Unicast packets going out from Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth outnucast packets|gige eth1outnucast packets 1.3.6.1.4.1.5454.1.60.4.15.1.0 vmDiff mkDirect sutCustom # gige eth1outnucast packets 1 no 0 no no yes no Display number of non-Unicast packets going out from Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth outnucast packets|gige eth2outnucast packets 1.3.6.1.4.1.5454.1.60.4.15.2.0 vmDiff mkDirect sutCustom # gige eth2outnucast packets 1 no 0 no no yes no Display number of non-Unicast packets going out from Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth out total packets|gige eth1out total packets 1.3.6.1.4.1.5454.1.60.4.16.1.0 vmDiff mkDirect sutCustom # gige eth1out total packets 1 no 0 no no yes no Display number of non-Unicast packets going out from Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth out total packets|gige eth2out total packets 1.3.6.1.4.1.5454.1.60.4.16.2.0 vmDiff mkDirect sutCustom # gige eth2out total packets 1 no 0 no no yes no Display number of non-Unicast packets going out from Ethernet port 2 TRANGO-APEX-GIGE-MIB|ethcrcerrors|gige eth1 crc errors 1.3.6.1.4.1.5454.1.60.4.17.1.0 vmDiff mkDirect sutCustom # gige eth1 crc errors 1 no 0 no no yes no Display number of packets with CRC Errors for Ethernet port 1 TRANGO-APEX-GIGE-MIB|ethcrcerrors|gige eth2 crc errors 1.3.6.1.4.1.5454.1.60.4.17.2.0 vmDiff mkDirect sutCustom # gige eth2 crc errors 1 no 0 no no yes no Display number of packets with CRC Errors for Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth collision errors|gige eth1collsion errors 1.3.6.1.4.1.5454.1.60.4.18.1.0 vmDiff mkDirect sutCustom # gige eth1collsion errors 1 no 0 no no yes no Display number of collision errors for Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth collision errors|gige eth2collsion errors 1.3.6.1.4.1.5454.1.60.4.18.2.0 vmDiff mkDirect sutCustom # gige eth2collsion errors 1 no 0 no no yes no Display number of collision errors for Ethernet port 2 TRANGO-APEX-GIGE-MIB|eth priority queue|gige eth priority0 cos queue 1.3.6.1.4.1.5454.1.60.4.19.1.0 vmAbsolute mkDirect sutCustom # gige eth priority0 cos queue 1 no 0 no no no no Display/Set COS Queue for Priority 0 TRANGO-APEX-GIGE-MIB|eth priority queue|gige eth priority1 cos queue 1.3.6.1.4.1.5454.1.60.4.19.2.0 vmAbsolute mkDirect sutCustom # gige eth priority1 cos queue 1 no 0 no no no no Display/Set COS Queue for Priority 2 TRANGO-APEX-GIGE-MIB|eth priority queue|gige eth priority2 cos queue 1.3.6.1.4.1.5454.1.60.4.19.3.0 vmAbsolute mkDirect sutCustom # gige eth priority2 cos queue 1 no 0 no no no no Display/Set COS Queue for Priority 2 TRANGO-APEX-GIGE-MIB|eth priority queue|gige eth priority3 cos queue 1.3.6.1.4.1.5454.1.60.4.19.4.0 vmAbsolute mkDirect sutCustom # gige eth priority3 cos queue 1 no 0 no no no no Display/Set COS Queue for Priority 3 TRANGO-APEX-GIGE-MIB|eth priority queue|gige eth priority4 cos queue 1.3.6.1.4.1.5454.1.60.4.19.5.0 vmAbsolute mkDirect sutCustom # gige eth priority4 cos queue 1 no 0 no no no no Display/Set COS Queue for Priority 4 TRANGO-APEX-GIGE-MIB|eth priority queue|gige eth priority5 cos queue 1.3.6.1.4.1.5454.1.60.4.19.6.0 vmAbsolute mkDirect sutCustom # gige eth priority5 cos queue 1 no 0 no no no no Display/Set COS Queue for Priority 5 TRANGO-APEX-GIGE-MIB|eth priority queue|gige eth priority6 cos queue 1.3.6.1.4.1.5454.1.60.4.19.7.0 vmAbsolute mkDirect sutCustom # gige eth priority6 cos queue 1 no 0 no no no no Display/Set COS Queue for Priority 6 TRANGO-APEX-GIGE-MIB|eth priority queue|gige eth priority7 cos queue 1.3.6.1.4.1.5454.1.60.4.19.8.0 vmAbsolute mkDirect sutCustom # gige eth priority7 cos queue 1 no 0 no no no no Display/Set COS Queue for Priority 7 TRANGO-APEX-GIGE-MIB|eth auto|gige eth1auto negotiate 1.3.6.1.4.1.5454.1.60.4.20.1.0 vmAbsolute mkDirect sutCustom # gige eth1auto negotiate 1 no 0 no no no no Activate/Deactive link status on Ethernet port 1 TRANGO-APEX-GIGE-MIB|eth auto|gige eth2auto negotiate 1.3.6.1.4.1.5454.1.60.4.20.2.0 vmAbsolute mkDirect sutCustom # gige eth2auto negotiate 1 no 0 no no no no Activate/Deactive link status on Ethernet port 2 TRANGO-APEX-MODEM-MIB|modem|modem loopback mode 1.3.6.1.4.1.5454.1.60.2.1.0 vmAbsolute mkDirect sutCustom # modem loopback mode 1 no 0 no no no no Set/Display the Loopback Mode TRANGO-APEX-MODEM-MIB|modem|modem data pattern 1.3.6.1.4.1.5454.1.60.2.2.0 vmAbsolute mkDirect sutCustom # modem data pattern 1 no 0 no no no no Set/Display the current Loopback Pattern (source) TRANGO-APEX-MODEM-MIB|modem|modemmse 1.3.6.1.4.1.5454.1.60.2.4.0 vmAbsolute mkDirect sutCustom # modemmse 1 no 0 no no no no Read current Mean Squared Error TRANGO-APEX-MODEM-MIB|lock|modem lock status 1.3.6.1.4.1.5454.1.60.2.6.1.0 vmAbsolute mkDirect sutCustom # modem lock status 1 no 0 no no no no Read current Internal Automatic Gain Correction TRANGO-APEX-MODEM-MIB|lock|modem timing lock 1.3.6.1.4.1.5454.1.60.2.6.2.0 vmAbsolute mkDirect sutCustom # modem timing lock 1 no 0 no no no no Indicate RX Timing Lock status TRANGO-APEX-MODEM-MIB|lock|modem preamble lock 1.3.6.1.4.1.5454.1.60.2.6.3.0 vmAbsolute mkDirect sutCustom # modem preamble lock 1 no 0 no no no no Indicate Preamble Lock status TRANGO-APEX-MODEM-MIB|lock|modem ldpc lock 1.3.6.1.4.1.5454.1.60.2.6.4.0 vmAbsolute mkDirect sutCustom # modem ldpc lock 1 no 0 no no no no Indicate LDPC Lock status TRANGO-APEX-MODEM-MIB|lock|modem reserved 1.3.6.1.4.1.5454.1.60.2.6.5.0 vmAbsolute mkDirect sutCustom # modem reserved 1 no 0 no no no no Reserved TRANGO-APEX-MODEM-MIB|acm|modemacmenable 1.3.6.1.4.1.5454.1.60.2.7.1.0 vmAbsolute mkDirect sutCustom # modemacmenable 1 no 0 no no no no Enable/Disable Adaptive Modulation feature TRANGO-APEX-MODEM-MIB|acmprofile|modem acm profile qpsk enable 1.3.6.1.4.1.5454.1.60.2.7.2.1.0 vmAbsolute mkDirect sutCustom # modem acm profile qpsk enable 1 no 0 no no no no Enable/Disable ACM QPSK profile TRANGO-APEX-MODEM-MIB|acmprofile|modem acm profile qam16 enable 1.3.6.1.4.1.5454.1.60.2.7.2.2.0 vmAbsolute mkDirect sutCustom # modem acm profile qam16 enable 1 no 0 no no no no Enable/Disable ACM QAM16 profile TRANGO-APEX-MODEM-MIB|acmprofile|modem acm profile qam32 enable 1.3.6.1.4.1.5454.1.60.2.7.2.3.0 vmAbsolute mkDirect sutCustom # modem acm profile qam32 enable 1 no 0 no no no no Enable/Disable ACM QAM32 profile TRANGO-APEX-MODEM-MIB|acmprofile|modem acm profile qam64 enable 1.3.6.1.4.1.5454.1.60.2.7.2.4.0 vmAbsolute mkDirect sutCustom # modem acm profile qam64 enable 1 no 0 no no no no Enable/Disable ACM QAM64 profile TRANGO-APEX-MODEM-MIB|acmprofile|modem acm profile qam128 enable 1.3.6.1.4.1.5454.1.60.2.7.2.5.0 vmAbsolute mkDirect sutCustom # modem acm profile qam128 enable 1 no 0 no no no no Enable/Disable ACM QAM128 profile TRANGO-APEX-MODEM-MIB|acmprofile|modem acm profile qam256 enable 1.3.6.1.4.1.5454.1.60.2.7.2.6.0 vmAbsolute mkDirect sutCustom # modem acm profile qam256 enable 1 no 0 no no no no Enable/Disable ACM QAM256 profile TRANGO-APEX-MODEM-MIB|profile|modem acm tx profile 1.3.6.1.4.1.5454.1.60.2.8.1.0 vmAbsolute mkDirect sutCustom # modem acm tx profile 1 no 0 no no no no ACM Tx Profile TRANGO-APEX-MODEM-MIB|profile|modem acm rx profile 1.3.6.1.4.1.5454.1.60.2.8.2.0 vmAbsolute mkDirect sutCustom # modem acm rx profile 1 no 0 no no no no ACM Rx Profile TRANGO-APEX-RF-MIB|atpc|rfatpcenable 1.3.6.1.4.1.5454.1.60.3.1.1.0 vmAbsolute mkDirect sutCustom # rfatpcenable 1 no 0 no no no no Enable/Disable Automatic Transmit Power Control TRANGO-APEX-RF-MIB|atpc|rf atpc max power 1.3.6.1.4.1.5454.1.60.3.1.2.0 vmAbsolute mkDirect sutCustom # rf atpc max power 1 no 0 no no no no Maximum ATPC power TRANGO-APEX-RF-MIB|atpc|rf atpc step size 1.3.6.1.4.1.5454.1.60.3.1.3.0 vmAbsolute mkDirect sutCustom # rf atpc step size 1 no 0 no no no no ATPC step size for each of the increment/decrement TRANGO-APEX-RF-MIB|txfreq|rf tx frequency int 1.3.6.1.4.1.5454.1.60.3.2.2.0 vmAbsolute mkDirect sutCustom # rf tx frequency int 1 no 0 no no no no Set/Display the current TX frequency in integer TRANGO-APEX-RF-MIB|rxfreq|rf rx frequency int 1.3.6.1.4.1.5454.1.60.3.3.2.0 vmAbsolute mkDirect sutCustom # rf rx frequency int 1 no 0 no no no no Display the current RX frequency in integer TRANGO-APEX-RF-MIB|speed|rf symrate 1.3.6.1.4.1.5454.1.60.3.4.1.0 vmAbsolute mkDirect sutCustom # rf symrate 1 no 0 no no no no Set/Display the current Symbol Rate TRANGO-APEX-RF-MIB|speed|rf modulation 1.3.6.1.4.1.5454.1.60.3.4.2.0 vmAbsolute mkDirect sutCustom # rf modulation 1 no 0 no no no no Set/Display the current modulation TRANGO-APEX-RF-MIB|speed|rfbpf 1.3.6.1.4.1.5454.1.60.3.4.3.0 vmAbsolute mkDirect sutCustom # rfbpf 1 no 0 no no no no Display the current bandpass filter value TRANGO-APEX-RF-MIB|speed|rf channel width 1.3.6.1.4.1.5454.1.60.3.4.4.0 vmAbsolute mkDirect sutCustom # rf channel width 1 no 0 no no no no Display the current channel width TRANGO-APEX-RF-MIB|power|rf power int 1.3.6.1.4.1.5454.1.60.3.5.2.0 vmAbsolute mkDirect sutCustom # rf power int 1 no 0 no no no no Set/Display the current power in integer TRANGO-APEX-RF-MIB|rf|rfrssi led enable 1.3.6.1.4.1.5454.1.60.3.6.0 vmAbsolute mkDirect sutCustom # rfrssi led enable 1 no 0 no no no no Enable/Disable ODU LED display for RSSI TRANGO-APEX-RF-MIB|rf|rf temp 1.3.6.1.4.1.5454.1.60.3.7.0 vmAbsolute mkDirect sutCustom # rf temp 1 no 0 no no no no Read current system Temperature TRANGO-APEX-RF-MIB|target|rf target rssi int 1.3.6.1.4.1.5454.1.60.3.8.2.0 vmAbsolute mkDirect sutCustom # rf target rssi int 1 no 0 no no no no Set/Disable the current Target RSSI value in integer TRANGO-APEX-RF-MIB|rssi|rf rssi int 1.3.6.1.4.1.5454.1.60.3.9.2.0 vmAbsolute mkDirect sutCustom # rf rssi int 1 no 0 no no no no Read current RSSI value in Integer TRANGO-APEX-RF-MIB|rf pll|rf rfm rfpll 1.3.6.1.4.1.5454.1.60.3.10.1.0 vmAbsolute mkDirect sutCustom # rf rfm rfpll 1 no 0 no no no no RFM RX PLL lock status TRANGO-APEX-RF-MIB|rf pll|rf rfm ifpll 1.3.6.1.4.1.5454.1.60.3.10.2.0 vmAbsolute mkDirect sutCustom # rf rfm ifpll 1 no 0 no no no no RFM RX PLL lock status TRANGO-APEX-RF-MIB|rf pll|rf transmit pll 1.3.6.1.4.1.5454.1.60.3.10.3.0 vmAbsolute mkDirect sutCustom # rf transmit pll 1 no 0 no no no no Transmit PLL lock status TRANGO-APEX-RF-MIB|rf pll|rf recevied pll 1.3.6.1.4.1.5454.1.60.3.10.4.0 vmAbsolute mkDirect sutCustom # rf recevied pll 1 no 0 no no no no Loopback PLL lock status TRANGO-APEX-RF-MIB|rf in|rf in data octets 1.3.6.1.4.1.5454.1.60.3.11.1.0 vmDiff mkDirect sutCustom # rf in data octets 1 no 0 no no yes no Display total number of incoming Octets in FPGA TRANGO-APEX-RF-MIB|rf in|rf in data packets 1.3.6.1.4.1.5454.1.60.3.11.2.0 vmDiff mkDirect sutCustom # rf in data packets 1 no 0 no no yes no Display total number of incoming Packets in FPGA TRANGO-APEX-RF-MIB|rf in|rf in drop packets 1.3.6.1.4.1.5454.1.60.3.11.3.0 vmDiff mkDirect sutCustom # rf in drop packets 1 no 0 no no yes no Display total number of Ethernet drop packets goes in toFPGA TRANGO-APEX-RF-MIB|rf in|rf in port util 1.3.6.1.4.1.5454.1.60.3.11.4.0 vmAbsolute mkDirect sutCustom # rf in port util 1 no 0 no no no no Display current in port utilizaition percentage TRANGO-APEX-RF-MIB|rf in|rf in port rate 1.3.6.1.4.1.5454.1.60.3.11.5.0 vmAbsolute mkDirect sutCustom # rf in port rate 1 no 0 no no no no Display current in port rate TRANGO-APEX-RF-MIB|rf out|rf out data octets 1.3.6.1.4.1.5454.1.60.3.12.1.0 vmDiff mkDirect sutCustom # rf out data octets 1 no 0 no no yes no Display total number of outgoing Octets in FPGA TRANGO-APEX-RF-MIB|rf out|rf out data packets 1.3.6.1.4.1.5454.1.60.3.12.2.0 vmDiff mkDirect sutCustom # rf out data packets 1 no 0 no no yes no Display total number of outgoing Packets in FPGA TRANGO-APEX-RF-MIB|rf out|rf out port util 1.3.6.1.4.1.5454.1.60.3.12.3.0 vmAbsolute mkDirect sutCustom # rf out port util 1 no 0 no no no no Display current out port utilizaition percentage TRANGO-APEX-RF-MIB|rf out|rf out port rate 1.3.6.1.4.1.5454.1.60.3.12.4.0 vmAbsolute mkDirect sutCustom # rf out port rate 1 no 0 no no no no Display current out port rate TRANGO-APEX-SYS-MIB|sys|sys unit type 1.3.6.1.4.1.5454.1.60.1.1.0 vmAbsolute mkDirect sutCustom # sys unit type 1 no 0 no no no no Unit Type TRANGO-APEX-SYS-MIB|model|sys serial id 1.3.6.1.4.1.5454.1.60.1.4.2.0 vmAbsolute mkDirect sutCustom # sys serial id 1 no 0 no no no no System Serial ID TRANGO-APEX-SYS-MIB|sys|sys backup status 1.3.6.1.4.1.5454.1.60.1.6.0 vmAbsolute mkDirect sutCustom # sys backup status 1 no 0 no no no no The backup link is operational and ready or not TRANGO-APEX-SYS-MIB|opmode|sys default opmode 1.3.6.1.4.1.5454.1.60.1.7.1.0 vmAbsolute mkDirect sutCustom # sys default opmode 1 no 0 no no no no Default operation mode TRANGO-APEX-SYS-MIB|opmode|sys opmode 1.3.6.1.4.1.5454.1.60.1.7.2.0 vmAbsolute mkDirect sutCustom # sys opmode 1 no 0 no no no no Display/Set current Opmode TRANGO-APEX-SYS-MIB|sys|sys save 1.3.6.1.4.1.5454.1.60.1.9.0 vmAbsolute mkDirect sutCustom # sys save 1 no 0 no no no no Save the configuration parameter TRANGO-APEX-SYS-MIB|sys|sys reboot 1.3.6.1.4.1.5454.1.60.1.10.0 vmAbsolute mkDirect sutCustom # sys reboot 1 no 0 no no no no Reboot the system TRANGO-APEX-SYS-MIB|sys|sys reset factory default 1.3.6.1.4.1.5454.1.60.1.11.0 vmAbsolute mkDirect sutCustom # sys reset factory default 1 no 0 no no no no Reset configuration parameter to factory defaults TRANGO-APEX-SYS-MIB|daemon|systftpd 1.3.6.1.4.1.5454.1.60.1.14.1.0 vmAbsolute mkDirect sutCustom # systftpd 1 no 0 no no no no Enable or disable to receive code or fileset download TRANGO-APEX-SYS-MIB|daemon|sys httpd 1.3.6.1.4.1.5454.1.60.1.14.2.0 vmAbsolute mkDirect sutCustom # sys httpd 1 no 0 no no no no Enable or disable HTTPD TRANGO-APEX-SYS-MIB|daemon|sys telnetd 1.3.6.1.4.1.5454.1.60.1.14.3.0 vmAbsolute mkDirect sutCustom # sys telnetd 1 no 0 no no no no Enable or disable Telnetd TRANGO-APEX-SYS-MIB|sys|sys alignment mode 1.3.6.1.4.1.5454.1.60.1.15.0 vmAbsolute mkDirect sutCustom # sys alignment mode 1 no 0 no no no no Alignment mode of the radio TRANGO-APEX-SYS-MIB|sys|sys failover 1.3.6.1.4.1.5454.1.60.1.16.0 vmAbsolute mkDirect sutCustom # sys failover 1 no 0 no no no no Enable/Disable failover feature TRANGO-APEX-SYS-MIB|trapinfo|sys trap enable 1.3.6.1.4.1.5454.1.60.1.17.1.0 vmAbsolute mkDirect sutCustom # sys trap enable 1 no 0 no no no no Enable/Disable SNMP Trap TRANGO-APEX-SYS-MIB|image|sys image upgrade 1.3.6.1.4.1.5454.1.60.1.18.1.0 vmAbsolute mkDirect sutCustom # sys image upgrade 1 no 0 no no no no Upgrade specified image TRANGO-APEX-SYS-MIB|image|sys image toggle 1.3.6.1.4.1.5454.1.60.1.18.2.0 vmAbsolute mkDirect sutCustom # sys image toggle 1 no 0 no no no no Toggle to previous image TRANGO-APEX-SYS-MIB|image|sys image upgrade status 1.3.6.1.4.1.5454.1.60.1.18.3.0 vmAbsolute mkDirect sutCustom # sys image upgrade status 1 no 0 no no no no Get the current image upgrade progress status TRANGO-APEX-SYS-MIB|sys|sysrpsenable 1.3.6.1.4.1.5454.1.60.1.19.0 vmAbsolute mkDirect sutCustom # sysrpsenable 1 no 0 no no no no Enable/Disable rapid port shutdown feature TRANGO-APEX-SYS-MIB|sys|sys smart mode 1.3.6.1.4.1.5454.1.60.1.20.0 vmAbsolute mkDirect sutCustom # sys smart mode 1 no 0 no no no no Enable/Disable Smart mode TRANGO-APEX-SYS-MIB|sys|sys reset default ip 1.3.6.1.4.1.5454.1.60.1.21.0 vmAbsolute mkDirect sutCustom # sys reset default ip 1 no 0 no no no no Reset ipconfig to default IP TRANGO-APEX-SYS-MIB|sys|sys config option 1.3.6.1.4.1.5454.1.60.1.23.0 vmAbsolute mkDirect sutCustom # sys config option 1 no 0 no no no no Perform config export, import or remove configuration file TRANGO-APEX-SYS-MIB|diagnostic|sys diagnostic 1.3.6.1.4.1.5454.1.60.1.24.1.0 vmAbsolute mkDirect sutCustom # sys diagnostic 1 no 0 no no no no Run diagnostic and put the data in a file TRANGO-APEX-SYS-MIB|diagnostic|sys diagnostic status 1.3.6.1.4.1.5454.1.60.1.24.2.0 vmAbsolute mkDirect sutCustom # sys diagnostic status 1 no 0 no no no no Display current status of diagnostic command TRANGO-APEX-SYS-MIB|syslog|sys syslog export 1.3.6.1.4.1.5454.1.60.1.25.1.0 vmAbsolute mkDirect sutCustom # sys syslog export 1 no 0 no no no no export syslog into a file TRANGO-APEX-SYS-MIB|syslog|sys syslog level 1.3.6.1.4.1.5454.1.60.1.25.2.0 vmAbsolute mkDirect sutCustom # sys syslog level 1 no 0 no no no no bitmap value for the loglevel TRANGO-APEX-SYS-MIB|sys|sys clear counter 1.3.6.1.4.1.5454.1.60.1.26.0 vmAbsolute mkDirect sutCustom # sys clear counter 1 no 0 no no no no Clear current counters TRANGO-APEX-SYS-MIB|standby|sys standby link 1.3.6.1.4.1.5454.1.60.1.27.1.0 vmAbsolute mkDirect sutCustom # sys standby link 1 no 0 no no no no Standby unit link status TRANGO-APEX-SYS-MIB|standby|sys standby pll 1.3.6.1.4.1.5454.1.60.1.27.2.0 vmAbsolute mkDirect sutCustom # sys standby pll 1 no 0 no no no no Standby link ODU¢PLL status TRANGO-APEX-SYS-MIB|standby|sys standby rssi 1.3.6.1.4.1.5454.1.60.1.27.3.0 vmAbsolute mkDirect sutCustom # sys standby rssi 1 no 0 no no no no Standby link RSSI value TRANGO-APEX-T1E1-MIB|t1e1status|t1e1port1status 1.3.6.1.4.1.5454.1.60.5.1.1.0 vmAbsolute mkDirect sutCustom # t1e1port1status 1 no 0 no no no no Show link status on T1/E1 port 1 TRANGO-APEX-T1E1-MIB|t1e1status|t1e1port2status 1.3.6.1.4.1.5454.1.60.5.1.2.0 vmAbsolute mkDirect sutCustom # t1e1port2status 1 no 0 no no no no Show link status on T1/E1 port 2 TRANGO-APEX-T1E1-MIB|t1e1status|t1e1port3status 1.3.6.1.4.1.5454.1.60.5.1.3.0 vmAbsolute mkDirect sutCustom # t1e1port3status 1 no 0 no no no no Show link status on T1/E1 port 3 TRANGO-APEX-T1E1-MIB|t1e1status|t1e1port4status 1.3.6.1.4.1.5454.1.60.5.1.4.0 vmAbsolute mkDirect sutCustom # t1e1port4status 1 no 0 no no no no Show link status on T1/E1 port 4 TRANGO-APEX-T1E1-MIB|t1e1status|t1e1port5status 1.3.6.1.4.1.5454.1.60.5.1.5.0 vmAbsolute mkDirect sutCustom # t1e1port5status 1 no 0 no no no no Show link status on T1/E1 port 5 TRANGO-APEX-T1E1-MIB|t1e1status|t1e1port6status 1.3.6.1.4.1.5454.1.60.5.1.6.0 vmAbsolute mkDirect sutCustom # t1e1port6status 1 no 0 no no no no Show link status on T1/E1 port 6 TRANGO-APEX-T1E1-MIB|t1e1status|t1e1port7status 1.3.6.1.4.1.5454.1.60.5.1.7.0 vmAbsolute mkDirect sutCustom # t1e1port7status 1 no 0 no no no no Show link status on T1/E1 port 7 TRANGO-APEX-T1E1-MIB|t1e1status|t1e1port8status 1.3.6.1.4.1.5454.1.60.5.1.8.0 vmAbsolute mkDirect sutCustom # t1e1port8status 1 no 0 no no no no Show link status on T1/E1 port 8 TRANGO-APEX-T1E1-MIB|t1e1enable|t1e1port1enable 1.3.6.1.4.1.5454.1.60.5.2.1.0 vmAbsolute mkDirect sutCustom # t1e1port1enable 1 no 0 no no no no Show link enable on T1/E1 port 1 TRANGO-APEX-T1E1-MIB|t1e1enable|t1e1port2enable 1.3.6.1.4.1.5454.1.60.5.2.2.0 vmAbsolute mkDirect sutCustom # t1e1port2enable 1 no 0 no no no no Show link enable on T1/E1 port 2 TRANGO-APEX-T1E1-MIB|t1e1enable|t1e1port3enable 1.3.6.1.4.1.5454.1.60.5.2.3.0 vmAbsolute mkDirect sutCustom # t1e1port3enable 1 no 0 no no no no Show link enable on T1/E1 port 3 TRANGO-APEX-T1E1-MIB|t1e1enable|t1e1port4enable 1.3.6.1.4.1.5454.1.60.5.2.4.0 vmAbsolute mkDirect sutCustom # t1e1port4enable 1 no 0 no no no no Show link enable on T1/E1 port 4 TRANGO-APEX-T1E1-MIB|t1e1enable|t1e1port5enable 1.3.6.1.4.1.5454.1.60.5.2.5.0 vmAbsolute mkDirect sutCustom # t1e1port5enable 1 no 0 no no no no Show link enable on T1/E1 port 5 TRANGO-APEX-T1E1-MIB|t1e1enable|t1e1port6enable 1.3.6.1.4.1.5454.1.60.5.2.6.0 vmAbsolute mkDirect sutCustom # t1e1port6enable 1 no 0 no no no no Show link enable on T1/E1 port 6 TRANGO-APEX-T1E1-MIB|t1e1enable|t1e1port7enable 1.3.6.1.4.1.5454.1.60.5.2.7.0 vmAbsolute mkDirect sutCustom # t1e1port7enable 1 no 0 no no no no Show link enable on T1/E1 port 7 TRANGO-APEX-T1E1-MIB|t1e1enable|t1e1port8enable 1.3.6.1.4.1.5454.1.60.5.2.8.0 vmAbsolute mkDirect sutCustom # t1e1port8enable 1 no 0 no no no no Show link enable on T1/E1 port 8 TRANGO-APEX-T1E1-MIB|t1e1lb|t1e1port1loopback 1.3.6.1.4.1.5454.1.60.5.3.1.0 vmAbsolute mkDirect sutCustom # t1e1port1loopback 1 no 0 no no no no Show link enable on T1/E1 port 1 TRANGO-APEX-T1E1-MIB|t1e1lb|t1e1port2loopback 1.3.6.1.4.1.5454.1.60.5.3.2.0 vmAbsolute mkDirect sutCustom # t1e1port2loopback 1 no 0 no no no no Show link enable on T1/E1 port 2 TRANGO-APEX-T1E1-MIB|t1e1lb|t1e1port3loopback 1.3.6.1.4.1.5454.1.60.5.3.3.0 vmAbsolute mkDirect sutCustom # t1e1port3loopback 1 no 0 no no no no Show link enable on T1/E1 port 3 TRANGO-APEX-T1E1-MIB|t1e1lb|t1e1port4loopback 1.3.6.1.4.1.5454.1.60.5.3.4.0 vmAbsolute mkDirect sutCustom # t1e1port4loopback 1 no 0 no no no no Show link enable on T1/E1 port 4 TRANGO-APEX-T1E1-MIB|t1e1lb|t1e1port5loopback 1.3.6.1.4.1.5454.1.60.5.3.5.0 vmAbsolute mkDirect sutCustom # t1e1port5loopback 1 no 0 no no no no Show link enable on T1/E1 port 5 TRANGO-APEX-T1E1-MIB|t1e1lb|t1e1port6loopback 1.3.6.1.4.1.5454.1.60.5.3.6.0 vmAbsolute mkDirect sutCustom # t1e1port6loopback 1 no 0 no no no no Show link enable on T1/E1 port 6 TRANGO-APEX-T1E1-MIB|t1e1lb|t1e1port7loopback 1.3.6.1.4.1.5454.1.60.5.3.7.0 vmAbsolute mkDirect sutCustom # t1e1port7loopback 1 no 0 no no no no Show link enable on T1/E1 port 7 TRANGO-APEX-T1E1-MIB|t1e1lb|t1e1port8loopback 1.3.6.1.4.1.5454.1.60.5.3.8.0 vmAbsolute mkDirect sutCustom # t1e1port8loopback 1 no 0 no no no no Show link enable on T1/E1 port 8